Overview
Ta1 Tantalum Sheet is a thin pure tantalum flat material used when buyers need a small-thickness tantalum layer instead of rigid plate stock. It is mainly considered for thin lining layers, isolation sheets, cover layers, surface-facing pieces and custom thin tantalum sheet parts.
This product should not be treated the same as Ta1 Tantalum Plate. Plate is usually selected for thicker, more rigid flat parts, inserts, discs, coupons or machining blanks. Sheet focuses more on thin gauge, surface side, usable area, flat support during packing and whether the material will be placed, covered or lightly fitted into an assembly.
Compared with common nickel sheet products, Ta1 tantalum sheet is usually less about general stamping or conductive contact parts. The important points are tantalum exposure, working medium, temperature, atmosphere, surface protection and careful material use.
Quick Details
| Item | Details |
| Material | Tantalum |
| Grade | Ta1 |
| Product Form | Thin tantalum sheet |
| Main Focus | Thin layer, surface side, usable area and packing support |
| Thickness | Confirmed according to order requirement |
| Size Form | Full sheet, cut sheet, strip or custom shape |
| Surface | Pickled, ground, sanded or polished |
| Typical Use | Thin lining layer, isolation sheet, cover layer, surface-facing piece |
Before Quotation
For a faster quotation, please send the following details:
- Grade: Ta1 or other required tantalum grade
- Thickness: required sheet thickness and tolerance if important
- Usable Area: full sheet size, cut size or exposed surface area
- Shape: sheet, strip, cover layer, isolation piece or drawing shape
- Quantity: pieces, square meters, kilograms or total weight
- Surface Side: one-side requirement or both-side requirement if applicable
- Surface Finish: pickled, ground, sanded, polished or other finish
- Working Condition: medium, temperature, atmosphere or assembly use
Clear thickness, exposed side and working condition help us check whether the order should be supplied as thin sheet stock or prepared as custom tantalum sheet pieces.
Specifications
| Specification | Description |
| Product Name | Ta1 Tantalum Sheet |
| Material Type | Pure tantalum |
| Grade | Ta1 |
| Related Grade | Ta2 or other tantalum grade can be checked if required |
| Standard | ASTM B708 when applicable, or buyer specification |
| Product Form | Thin tantalum sheet / cut sheet piece |
| Thickness | Confirmed according to buyer requirement |
| Usable Area | Full sheet, cut size, strip or drawing-based area |
| Surface Condition | Pickled, ground, sanded, polished or customized |
| Appearance | Gray-silver metallic surface after suitable finishing |
| Edge Condition | Cut edge, deburred edge or drawing-based edge |
| Processing | Cutting, slitting or simple shape preparation |
| Surface Side | Should be confirmed if one side is functional |
| Packing Method | Flat supported packing or separated protection |
| Order Note | Thickness, surface side and working condition should be clear |
Material Fit
Thin Lining Layer
Ta1 tantalum sheet can be considered when a thin tantalum layer is needed inside a selected assembly. Thickness, surface side and working condition should be reviewed.
Isolation Sheet
Sheet form is suitable for thin isolation or separation use where plate rigidity is not required. Flatness and surface condition may affect direct use.
Surface-Facing Piece
Thin tantalum sheet may be used when only a limited surface area needs tantalum exposure. The exposed side and edge condition should be confirmed.
◆ General Note: Tantalum grade selection should be checked with actual service condition, temperature, medium, atmosphere, exposure area and buyer specification.
Applications
Thin Lining Layers
Used where a thin tantalum layer is required inside selected equipment or assembly areas.
Isolation Sheets
Used as thin tantalum isolation sheets where thickness, flatness and surface condition should be controlled.
Cover Layers
Used as tantalum cover layers for selected flat or lightly fitted parts with surface protection needs.
Surface-Facing Pieces
Used where only one exposed surface needs tantalum material rather than a thick plate component.
Custom Cut Sheets
Used for non-standard tantalum sheet pieces with special size, surface side or edge requirement.
Thin Tantalum Strips
Used for narrow tantalum sheet strips where usable area, thickness and packing protection matter.
Packing & Delivery
Flat Support
Thin tantalum sheets should be packed with flat support to reduce bending, folding and corner damage.
Surface Separation
Ground, polished or surface-sensitive sheets can be separated with paper, film or foam to reduce scratches.
Small Piece Protection
Cut sheets, strips and custom pieces can be grouped or packed separately according to size, quantity and surface requirement.
FAQ
Q1: What is the difference between Ta1 Tantalum Sheet and Ta1 Tantalum Plate?
A: Ta1 Tantalum Sheet is usually thinner and used as a thin layer, isolation sheet, cover layer or surface-facing piece. Tantalum plate is usually thicker and more suitable for rigid flat parts, inserts, discs or machining blanks.
Q2: What information is needed for quotation?
A: Please send grade, thickness, usable area, quantity, surface finish and working condition. If the sheet has a special shape or surface side requirement, a drawing is recommended.
Q3: Can tantalum sheet be cut into strips or small sheets?
A: Yes, strips and small sheet pieces can be checked according to thickness, size and quantity. Edge and packing requirements should be confirmed if the pieces are used directly.
Q4: Is tantalum sheet suitable for bending or wrapping?
A: Simple fitting or light forming may be discussed according to thickness and shape. If bending direction is important, please provide a drawing or sample photo.
Q5: What surface finish can be discussed?
A: Pickled, ground, sanded or polished surfaces can be discussed. The suitable option depends on exposed side, working condition and handling requirement.
Q6: Why should the surface side be confirmed?
A: For some thin sheet uses, only one side may be exposed or functional. Confirming the surface side helps avoid misunderstanding before processing and packing.
Q7: How should thin tantalum sheets be packed?
A: Thin sheets should be supported flat and separated according to surface condition. This helps reduce bending, scratches and corner damage.
Q8: What affects delivery time?
A: Delivery time depends on grade, thickness, sheet size, quantity, surface finish and any custom cutting or special handling requirement.
About Us
Baoji Zhongxinbao Metal Materials Co., Ltd. supplies titanium materials and selected rare metal products for industrial, chemical, electrochemical, vacuum furnace, machining and custom fabrication applications.
For Ta1 Tantalum Sheet, we can help check practical supply options for thin sheet thickness, usable area, surface side, cut size, surface finish and packing protection. For custom thin tantalum sheet pieces, we focus on thickness control, edge condition, surface handling and flat supported packing before supply.
Please send your required Ta1 Tantalum Sheet thickness, usable area, quantity, surface condition and application through the inquiry form below.
Hot Tags: ta1 tantalum sheet, China ta1 tantalum sheet manufacturers, suppliers, factory
