Overview
Ta1 Tantalum Plate is a pure tantalum flat material supplied for buyers who need tantalum in plate form for corrosion-facing surfaces, vacuum furnace shields, high-temperature flat parts, laboratory corrosion coupons, insert plates and custom tantalum plate pieces.
Different from a general plate product page, this product should be checked by usable plate area, exposed surface, thickness allowance, cutting layout, surface condition and final working environment. Tantalum is a high-density and high-value material, so the cutting plan and part shape can affect both material use and cost.
For this product, the important question is not only "what size plate". It is also whether the plate will be used as a wetted surface, a furnace shield, a coupon, a machined insert or a drawing-based flat component.
Quick Details
| Item | Details |
| Material | Tantalum |
| Grade | Ta1 |
| Product Form | Pure tantalum plate / flat tantalum stock |
| Main Focus | Exposed surface, cutting layout and working condition |
| Size Basis | Thickness, usable area, cut shape or drawing size |
| Surface | Pickled, ground, sanded or polished |
| Part Support | Cutting, discs, coupons, holes, inserts, simple machining |
| Typical Use | Barrier plates, furnace shields, coupons, inserts, flat parts |
Product Description
Tantalum Flat Stock
Ta1 Tantalum Plate is supplied as dense flat tantalum material. It is often used when the buyer needs a stable tantalum surface rather than rod, tube, wire or cube stock.
Surface-Facing Use
Many tantalum plate orders are related to surface exposure. The plate may work as a corrosion-facing insert, a lining piece, a shield, a coupon or a flat component where surface condition and working medium matter.
Cutting Layout
Because tantalum is a high-value material, drawing size, part quantity and cutting layout should be checked carefully. Rectangles, discs, strips and shaped pieces may follow different material-use routes.
Specifications
| Specification | Description |
| Product Name | Ta1 Tantalum Plate |
| Material Type | Pure tantalum |
| Grade | Ta1 |
| Related Grade | Ta2 or other tantalum grade can be checked if required |
| Standard | ASTM B708 when applicable, or buyer specification |
| Product Form | Tantalum plate / flat tantalum stock |
| Thickness | Confirmed according to order requirement |
| Usable Area | Full plate, cut area or drawing-based shape |
| Surface Condition | Pickled, ground, sanded, polished or customized |
| Appearance | Gray-silver metallic surface after suitable finishing |
| Cut Form | Rectangle, strip, disc, coupon or profile piece |
| Processing Method | Cutting, drilling, grinding or simple flat machining |
| Edge Requirement | Normal cut, deburred, chamfered or drawing-based edge |
| Packing Method | Separated protection according to surface and part size |
| Order Note | Exposure surface and working condition should be clear |
Before Quotation
For a faster quotation, please send the following details:
- Grade: Ta1 or other required tantalum grade
- Thickness: required plate thickness and tolerance if important
- Usable Area: full plate size, cut piece size or exposed surface area
- Part Shape: rectangle, disc, coupon, strip, insert or drawing profile
- Quantity: pieces, square meters, kilograms or total weight
- Surface: pickled, ground, sanded, polished or other finish
- Processing: cutting, drilling, deburring, grinding or simple machining
- Working Condition: medium, temperature, atmosphere or furnace use if applicable
Clear shape and exposure details help us check whether the order is simple plate stock, coupon pieces, furnace shielding material or custom tantalum plate parts.
Material Fit
Wetted Surface Use
Ta1 tantalum plate can be considered when a flat tantalum surface is needed for selected corrosion-facing parts. Medium, concentration and exposed area should be checked before use.
Vacuum Furnace Use
Tantalum plate may be used for selected furnace shields, separators or high-temperature flat components. Atmosphere, contact material and temperature range should be reviewed.
Coupon and Insert Use
Plate form is practical for corrosion coupons, test plates, inserts and small flat pieces. Cutting accuracy, edge condition and surface finish may affect direct use.
◆ General Note: Tantalum grade selection should be checked with actual service condition, temperature, medium, atmosphere, fabrication route and buyer specification.
Processing & Supply
Layout Checking
For tantalum plate orders, part layout can affect material use. Multiple small pieces, discs or strips should be checked together with the original plate size.
Surface Preparation
Pickled, ground or polished surface can be discussed according to whether the plate will be used as a working surface, visual surface or machining blank.
Small Part Preparation
Tantalum plate can be prepared into coupons, inserts, strips, discs or simple drawing-based pieces. Burr, edge and packing requirements should be confirmed for direct-use parts.
Key Features
High-Value Material Planning
01
Surface-Facing Plate Use
02
Coupon and Insert Support
03
Surface Finish Selection
04
Separated Packing
05
Buyer Check Points
Exposed Surface
Cutting Layout
Thickness Allowance
Edge and Burr
Surface Cleanliness
Working Environment
Applications
Corrosion-Facing Inserts
Used as tantalum insert plates where only selected flat surfaces require tantalum exposure.
Laboratory Corrosion Coupons
Used as tantalum test coupons for material comparison, corrosion checking or internal evaluation.
Vacuum Furnace Shields
Used for selected tantalum furnace shields, separators or flat heat-related components under suitable atmosphere.
Tantalum Disc Pieces
Used for round plate pieces, washers or flat discs where thickness, edge and surface condition matter.
Custom Flat Components
Used for drawing-based flat tantalum parts with holes, slots, profiles or special edge requirements.
Surface Barrier Pieces
Used as small tantalum barrier pieces, cover plates or protective flat parts in selected assemblies.
Packing & Delivery
Surface Separation
Tantalum plates can be separated with paper, film, foam or other protective material according to surface finish.
Small Piece Packing
Coupons, discs, inserts and strips can be grouped or packed separately according to shape, quantity and surface requirement.
High-Density Handling
Tantalum is dense, so even small plates can have noticeable weight. Packing should consider weight, edge protection and shipment method.
FAQ
Q1: What information is needed for Ta1 Tantalum Plate?
A: Please provide grade, thickness, usable area, part shape, quantity, surface condition and working environment. A drawing is recommended for coupons, discs, holes or profile pieces.
Q2: What is the difference between tantalum plate and tantalum sheet?
A: Tantalum sheet is usually thinner, while tantalum plate is usually thicker or more rigid. The exact naming depends on thickness and buyer specification.
Q3: Can Ta1 tantalum plate be cut into small pieces?
A: Yes, small pieces, strips, coupons, discs or inserts can be checked according to thickness, shape and quantity.
Q4: Why is cutting layout important for tantalum plate?
A: Tantalum is a high-value and high-density material. A clear cutting layout helps check material use and avoid unnecessary waste.
Q5: What surface finish can be discussed?
A: Pickled, ground, sanded or polished surfaces can be discussed. The suitable option depends on exposed surface, furnace use or further machining.
Q6: Can holes or special profiles be made?
A: Holes, discs, slots and simple profiles can be reviewed by drawing. Hole position, edge condition and tolerance should be shown clearly.
Q7: Can Ta1 tantalum plate be used in furnace applications?
A: It may be considered for selected vacuum furnace shields or flat components. Atmosphere, temperature and contact material should be checked first.
Q8: How should small tantalum plate pieces be packed?
A: Small tantalum pieces should be separated according to shape and surface condition. Polished pieces or thin pieces usually need better protection.
About Us
Baoji Zhongxinbao Metal Materials Co., Ltd. supplies titanium materials and selected rare metal products for industrial, chemical, electrochemical, vacuum furnace, machining and custom fabrication applications.
For Ta1 Tantalum Plate, we can help check practical supply options for plate thickness, usable area, cutting layout, surface finish, coupon pieces, insert plates and drawing-based tantalum flat parts. For small or polished tantalum plate pieces, we pay attention to edge condition, surface handling and packing protection before supply.
Please send your required Ta1 Tantalum Plate thickness, usable area, part shape, quantity and working condition through the inquiry form below.
Hot Tags: ta1 tantalum plate, China ta1 tantalum plate manufacturers, suppliers, factory
