Overview
Ni200 Nickel Sheet is a commercially pure nickel sheet material supplied in thinner flat form than nickel plate. It is usually selected when buyers need nickel material for light fabrication, bending, cutting, stamping, gasket blanks, shim sheets, liners, cover pieces or other thin nickel components.
Compared with Ni200 Nickel Plate, this product focuses more on thin sheet handling, forming behavior, surface condition, edge control and packing protection. The sheet may be used directly as a thin part, or it may be cut, punched, rolled or formed into a custom nickel component.
Nickel sheet usually has a silver white to silvery gray metallic appearance. A slight warm tone may appear depending on surface finish, annealing condition, storage environment or lighting.
Quick Details
| Item | Details |
| Material | Nickel |
| Grade | Ni200 / UNS N02200 |
| Product Form | Nickel sheet / thin flat nickel material |
| Main Focus | Thin sheet cutting, forming and part preparation |
| Thickness | Thin gauge or custom thickness by requirement |
| Sheet Size | Full sheet, cut sheet or drawing-based pieces |
| Surface | Pickled, ground, brushed or polished |
| Typical Use | Shims, gaskets, liners, cover sheets, punched parts |
Product Description
Thin Nickel Sheet Form
Ni200 Nickel Sheet is supplied as thin flat nickel material. It is more suitable than thick plate when the final part needs bending, wrapping, forming, punching or lightweight sheet fabrication.
Sheet Handling
For nickel sheet orders, thickness control, surface condition, edge burr and packing protection are important. Thin sheets can be easier to deform or scratch during cutting and transport, so the packing method should match the sheet size and surface.
Drawing-Based Pieces
Ni200 nickel sheet can be prepared as simple rectangles, strips, shims, gasket blanks, cover pieces or punched parts. For holes, slots, curved profiles or special edge shapes, a drawing helps confirm the processing route.
Specifications
| Specification | Description |
| Product Name | Ni200 Nickel Sheet |
| Material Type | Commercially pure nickel |
| Grade | Ni200 / UNS N02200 |
| Related Grade | Ni201 can be compared when required |
| Standard | ASTM B162 when applicable, or buyer specification |
| Product Form | Thin nickel sheet / cut sheet piece |
| Thickness | Confirmed according to order requirement |
| Width & Length | Full sheet, cut size or drawing shape |
| Surface Condition | Pickled, ground, brushed, polished or customized |
| Appearance | Silver white to silvery gray metallic surface |
| Edge Condition | Cut edge, deburred edge or drawing-based edge |
| Processing Method | Cutting, punching, bending, rolling or simple forming |
| Burr Requirement | Should be confirmed for direct-use sheet parts |
| Packing Method | Flat protection or separated packing by surface and size |
| Order Note | Thickness, forming use and surface requirement should be clear |
Before Quotation
For a faster quotation, please send the following details:
- Grade: Ni200, UNS N02200 or other nickel grade
- Thickness: required sheet thickness and tolerance if important
- Sheet Size: full sheet, cut size, strip size or drawing shape
- Quantity: pieces, square meters, kilograms or total weight
- Surface: pickled, ground, brushed, polished or other finish
- Processing: cutting, punching, bending, rolling or forming
- Edge Requirement: normal cut edge, deburred edge or special profile
- Application: shim, gasket blank, liner, cover sheet or formed part
Clear sheet thickness, surface and processing details help us check whether the order should be supplied as sheet stock or prepared as custom nickel sheet parts.
Material Fit
Thin Sheet Fabrication
Ni200 sheet is suitable when the part needs a thinner nickel form for cutting, bending, rolling or light fabrication. Thickness and forming direction should be checked before processing.
Lining or Cover Use
Nickel sheet can be used as liner pieces, cover sheets or surface protection parts in selected assemblies. Sheet size, flatness and surface condition should match the final use.
Shim and Gasket Use
Thin nickel sheet can be prepared into shims, gasket blanks or spacer sheets. Burr control, hole position and edge condition are important when parts are used directly.
◆ General Note:Nickel grade selection should be checked with actual service condition, temperature, medium, forming requirement and buyer specification.
Processing & Supply
Sheet Size Preparation
Ni200 Nickel Sheet can be checked as full sheets, cut sheets or smaller prepared pieces. The suitable route depends on thickness, size, quantity and surface requirement.
Cutting and Punching
Straight cutting, profile cutting, holes or punched shapes can be reviewed by drawing. Thin sheet parts should confirm burr, edge and deformation requirements.
Surface and Packing Handling
Surface finish and packing should be considered together. Brushed or polished sheets need better separation, while very thin sheets need protection against bending.
Key Features
Thin Gauge Supply
01
Forming-Friendly Shape
02
Cut and Punched Parts
03
Surface Selection
04
Flat Packing Protection
05
Buyer Check Points
Thickness Control
Sheet Size
Forming Requirement
Burr Control
Surface Condition
Packing Method
Applications
Thin Fabricated Parts
Used for light nickel sheet parts that require cutting, bending, rolling or simple forming before final use.
Shim Sheets
Used for nickel shim sheets or spacer pieces where thickness, flatness and edge condition should be controlled.
Gasket Blanks
Used as nickel gasket blanks or sealing-related sheet pieces that may require holes, profiles or deburred edges.
Liner Pieces
Used as thin nickel liner pieces or cover sheets in selected assemblies where sheet size and surface condition matter.
Punched Components
Used for punched nickel sheet parts with holes, slots or custom profiles according to drawing requirements.
Surface Cover Sheets
Used as nickel cover sheets or protective flat pieces where appearance, surface finish and packing protection are important.
Packing & Delivery
Thin Sheet Protection
Thin nickel sheets should be protected from bending, folding and corner damage during packing and shipment.
Surface Separation
Brushed, polished or surface-sensitive sheets can be separated with paper, film or foam to reduce scratches.
Cut Piece Packing
Small sheet pieces, shims or gasket blanks can be grouped or packed separately according to quantity, surface and edge condition.
FAQ
Q1: What is the difference between Ni200 Nickel Sheet and Ni200 Nickel Plate?
A: Ni200 Nickel Sheet is usually thinner and more suitable for bending, cutting, punching, shims, gaskets and light fabrication. Nickel plate is usually thicker and used more as rigid stock or machined plate material.
Q2: What information is needed for quotation?
A: Please send grade, thickness, sheet size, quantity, surface condition and processing requirement. A drawing is recommended for punched or special-shaped parts.
Q3: What color is Ni200 nickel sheet?
A: Ni200 nickel sheet usually has a silver white to silvery gray metallic appearance. A slight warm tone may appear due to surface finish, annealing, storage or lighting.
Q4: Can nickel sheet be cut into small pieces?
A: Cut pieces can be checked according to thickness, size and quantity. Please confirm burr, edge and packing requirements if the parts are used directly.
Q5: Can holes or profiles be punched?
A: Holes, slots and simple profiles can be reviewed by drawing. Hole position, edge distance and tolerance should be shown clearly.
Q6: Can Ni200 sheet be polished or brushed?
A: Polished or brushed surface can be discussed according to size, thickness and quantity. Surface protection should also be considered during packing.
Q7: Can Ni200 be replaced by Ni201?
A: It depends on the buyer's specification, temperature condition and application requirement. Grade substitution should be confirmed before order.
Q8: What affects delivery time?
A: Delivery time depends on grade, thickness, sheet size, quantity, surface finish, cutting, punching and drawing-based processing requirements.
About Us
Baoji Zhongxinbao Metal Materials Co., Ltd. supplies titanium materials and selected rare metal products for industrial, chemical, electrochemical, vacuum furnace, machining and custom fabrication applications.
For Ni200 Nickel Sheet, we can help check practical supply options for thin sheet thickness, cut size, surface finish, punching details, edge condition and packing protection. For drawing-based nickel sheet parts, we focus on sheet thickness, burr control, surface handling and shape confirmation before supply.
Please send your required Ni200 Nickel Sheet thickness, sheet size, quantity, surface condition and application through the inquiry form below.
Hot Tags: ni200 nickel sheet, China ni200 nickel sheet manufacturers, suppliers, factory
