Overview
Ni200 Nickel Plate is a commercially pure nickel plate material used when buyers need flat nickel stock for conductive plates, contact surfaces, electrochemical parts, battery-related components, spacers, gaskets and custom nickel plate pieces.
Different from a general corrosion plate page, this product is often checked by thickness, surface condition, conductivity-related use, contact area and cutting accuracy. For many buyers, the important point is not only plate size, but whether the nickel plate can match the required electrical, assembly or process function.
Nickel plate usually shows a silver white to silvery gray metallic surface. A slight warm tone may appear depending on surface finish, annealing condition, storage time or lighting, and this is normally different from the colder gray appearance of some other metal plates.
Quick Details
| Item | Details |
| Material | Nickel |
| Grade | Ni200 / UNS N02200 |
| Product Focus | Conductive, contact, electrochemical and custom nickel plate parts |
| Form | Flat nickel plate / cut nickel plate piece |
| Appearance | Silver white to silvery gray, sometimes with slight warm tone |
| Size Basis | Thickness, contact face size, drawing size or cut piece size |
| Surface | Pickled, ground, brushed or polished |
| Part Support | Cutting, holes, slots, deburring and simple plate processing |
| Typical Use | Contact plates, current collectors, spacers, pads, cell components |
Product Description
Nickel Plate for Contact Parts
Ni200 Nickel Plate is often used where a flat nickel surface is needed for electrical contact, current transfer, electrochemical work or custom plate components. Thickness and surface condition should match the final contact or assembly requirement.
Surface Appearance
Pure nickel plate usually has a silver white to silvery gray metallic appearance. Pickled, ground, brushed and polished surfaces may show different brightness and a slight warm tone.
Cutting and Part Preparation
The plate can be prepared as rectangular pieces, contact plates, spacers, pads, washers or simple drawing-based parts. For holes, slots, bending or special profiles, a drawing is more useful than a general size description.
Specifications
| Specification | Description |
| Product Name | Ni200 Nickel Plate |
| Material Type | Commercially pure nickel |
| Grade | Ni200 / UNS N02200 |
| Related Grade | Ni201 can be compared if required |
| Standard | ASTM B162 when applicable, or buyer specification |
| Product Form | Nickel plate, cut plate or flat nickel part |
| Thickness | Confirmed according to function and drawing requirement |
| Plate Size | Full size, cut piece size or contact face size |
| Surface Condition | Pickled, ground, brushed, polished or customized |
| Appearance | Silver white to silvery gray metallic surface |
| Edge Condition | Cut edge, deburred edge or drawing-based edge |
| Hole / Slot | Checked according to drawing when required |
| Burr Requirement | Should be confirmed for direct-use plate parts |
| Packing Method | Separated or protected according to surface and part size |
| Order Note | Function, surface and contact area should be clear |
Before Quotation
For a faster quotation, please send the following details:
- Grade: Ni200, UNS N02200 or other nickel grade
- Function: contact plate, current collector, spacer, pad or custom part
- Thickness: required thickness and acceptable tolerance
- Contact Area: surface area used for contact or current transfer if applicable
- Size: full plate, cut piece size or drawing dimension
- Surface: pickled, ground, brushed, polished or other finish
- Processing: holes, slots, bending, deburring or edge finishing
- Quantity: pieces, square meters, kilograms or total weight
Clear function and drawing details help us check whether the order is a normal nickel plate, contact plate or custom nickel part.
Material Fit
Conductive Plate Use
Ni200 is often considered for conductive plates, current collectors and contact-related components. Thickness, surface finish and contact area should be confirmed according to the actual assembly.
Electrochemical Use
Nickel plate may be used for selected electrochemical parts or cell components. Working medium, polarity, current condition and surface requirement should be checked before use.
Assembly Parts
Flat nickel plate can be cut into spacers, pads, covers or connection pieces. Hole position, flatness, burr control and edge condition may affect final assembly.
◆ General Note:Nickel grade selection should be checked with actual service condition, temperature, medium, current requirement and buyer specification.
Processing & Supply
Contact Plate Preparation
For contact or current-related use, thickness, surface and contact area should be checked together. A simple size description may not be enough.
Cut Piece Processing
Nickel plate can be prepared as rectangles, pads, spacers, washers or drawing-based pieces. Holes, slots and burr control should be shown clearly.
Surface Handling
Surface finish should match final use. If the plate is used as a contact face or visible surface, packing and separation should also be considered.
Key Features
Conductive Plate Stock
01
Contact Surface Options
02
Custom Cut Pieces
03
Burr and Edge Attention
04
Surface Protection
05
Buyer Check Points
Thickness and Function
Contact Area
Surface Finish
Burr Requirement
Hole Position
Grade Selection
Applications
Conductive Plates
Used for flat nickel plates where current transfer, contact surface or conductive function is required.
Current Collector Parts
Used for selected current collector plates or connection pieces where nickel material is specified.
Battery-Related Plates
Used for battery-related nickel plate parts, connection plates or custom cut pieces according to drawing.
Electrochemical Components
Used for selected electrochemical cell parts where nickel plate form and surface condition are required.
Contact Pads and Spacers
Used as nickel pads, spacers, washers or flat assembly parts that need cutting or hole processing.
Custom Nickel Plate Parts
Used for non-standard nickel plate components with special size, holes, slots, edge condition or surface requirement.
Packing & Delivery
Contact Surface Protection
Nickel plates used for contact faces should be separated to reduce scratches during handling and transport.
Small Part Packing
Small cut pieces, pads or spacers can be grouped or packed separately according to quantity, surface and edge condition.
Flat Plate Handling
Flat nickel plates should be packed to reduce bending, corner damage and surface marks during shipment.
FAQ
Q1: What details are most important for Ni200 Nickel Plate?
A: Grade, thickness, size, surface, function and quantity are important. If it is a contact plate or custom part, a drawing is recommended.
Q2: What color is Ni200 nickel plate?
A: It is usually silver white to silvery gray. A slight warm tone can appear due to surface finish, annealing, storage or lighting.
Q3: Is Ni200 different from Ni201?
A: Both are commercially pure nickel grades. If temperature, standard or project specification is important, please confirm which grade is required.
Q4: Is polished surface necessary for contact plates?
A: Not always. The surface should match the contact requirement. Ground or brushed surface may be enough for some parts.
Q5: Can the plate be cut into small pieces?
A: Yes, cut pieces can be checked according to thickness, size and quantity. Burr and edge requirements should be confirmed.
Q6: Can holes or slots be processed?
A: Drawing-based holes, slots or simple profiles can be reviewed. Please show position, size, tolerance and edge distance clearly.
Q7: Can Ni200 plate be used for electrochemical parts?
A: It may be considered for selected electrochemical components. Working medium, polarity, current condition and surface requirement should be checked.
Q8: How should polished or brushed nickel plates be packed?
A: Surface-sensitive plates should be separated with protective material to reduce scratches during shipment.
About Us
Baoji Zhongxinbao Metal Materials Co., Ltd. supplies titanium materials and selected rare metal products for industrial, chemical, electrochemical, vacuum furnace, machining and custom fabrication applications.
For Ni200 Nickel Plate, we can help check practical supply options for plate thickness, cut-to-size requirements, surface finish, edge treatment and drawing-based nickel plate parts. Packing can also be arranged according to plate size, surface condition and shipment method, especially for polished, brushed or thin nickel plates.
Please send your required Ni200 Nickel Plate grade, thickness, size, quantity, surface condition and application through the inquiry form below.
Hot Tags: ni200 nickel plate, China ni200 nickel plate manufacturers, suppliers, factory
