Industry Knowledge

A titanium anode is suitable for low-energy-loss water electrolysis only when the coating, active area, cell design, and operating condition work together. The titanium base gives the anode its shape

Titanium anodes are used in reverse pulse copper plating when the line needs a stable insoluble anode structure and controlled current distribution. In this process, the anode is not selected only to

A titanium electrolyzer for water treatment should be chosen from the water condition first, not from the outside size alone. The key points are electrolyte chemistry, chloride content, current densit

High-purity iridium-tantalum coated titanium anode plates are used in electrolysis when the system needs a stable coated anode for demanding anodic reactions, especially where oxygen evolution is a ma

Titanium anodes are used in water ionizer systems because the cell needs a stable coated electrode to pass current through water or electrolyte. In these systems, the titanium base gives the electrode

Water treatment plants use different types of titanium anodes because the water, reaction target, and cell design are not always the same. Some systems need chlorine generation. Some need oxygen evolu

For a desalination system, the first question is not simply “Do you need titanium anodes?” It is where the anode will be installed. Some anodes work in seawater intake antifouling. Some are used in el

A titanium anode structure for copper plating should be chosen from the job it has to do in the tank. In some tanks, titanium is only the basket that holds copper balls or copper pieces. In other case

A titanium anode in a disinfection system is normally used as the working anode inside an electrolytic cell. When the water or brine contains chloride, the anode surface helps generate active chlorine

Grade 5 titanium bar is not usually chosen just because a buyer wants “titanium.” It is normally chosen when the finished part needs more strength than commercially pure titanium can provide, while st

Most parts do not start with Ti-6Al-4V titanium bar, also known as Grade 5 titanium bar. They usually start with something more ordinary: a steel bar that has always been used, a simpler titanium grad

Grade 5 titanium bar should be used when a machined part needs higher strength than commercially pure titanium, but still needs low weight, corrosion resistance, and stable mechanical performance. It