Overview
Zr705 Zirconium Rod is a zirconium alloy round material, commonly related to UNS R60705. It is usually selected when the buyer's drawing, BOM, material list or project document requires a zirconium alloy grade instead of commercially pure zirconium rod.
This product is different from Zr702 Zirconium Rod. Zr702 rod is more often checked around process-contact round parts, tie rods, support rods or hanger-type components. Zr705 rod should be treated more as a grade-controlled alloy rod blank for machined round parts where starting diameter, shoulder geometry, grade requirement and final part dimensions matter.
For Zr705 rod orders, the key point is not only rod diameter and length. The original material note, grade substitution rule, machining allowance, step dimensions, thread engagement area, shoulder position and final fit should be confirmed before supply checking.
Quick Details
| Item | Details |
| Material | Zirconium alloy |
| Grade | Zr705 / UNS R60705 |
| Product Form | Zirconium alloy rod / round stock |
| Main Focus | Grade control, machining allowance and final part geometry |
| Size Basis | Starting diameter, cut length or drawing dimension |
| Surface | As-processed, turned, ground or polished |
| Custom Support | Cutting, facing, turning, step machining or thread review |
| Typical Use | Shouldered parts, connector rods, machined alloy blanks |
Before Quotation
For a faster quotation, please send the following details:
- Material Note: Zr705, UNS R60705 or the exact grade shown on drawing
- Grade Rule: mandatory grade or acceptable alternative
- Starting Size: raw rod diameter before machining
- Final Geometry: straight rod, stepped part, shoulder part or connector shape
- Cut Length: rough cut length or finished length
- Quantity: pieces, meters, kilograms or total weight
- Surface: as-processed, turned, ground, polished or other finish
- Machining Detail: shoulder, groove, thread, end face or tolerance requirement
Clear material note and final geometry help us avoid quoting a general zirconium rod when your order requires a Zr705 alloy machined blank.
Specifications
| Specification | Description |
| Product Name | Zr705 Zirconium Rod |
| Material Type | Zirconium alloy |
| Grade | Zr705 / UNS R60705 |
| Alloy Type | Niobium-containing zirconium grade |
| Related Grade | Zr702 / R60702 for comparison only |
| Standard | ASTM B550 when applicable, or buyer specification |
| Product Form | Round zirconium alloy rod stock |
| Starting Diameter | Confirmed by drawing or machining allowance |
| Cut Length | Fixed length, rough cut length or finished length |
| Surface Condition | As-processed, turned, ground, polished or customized |
| Geometry Check | Step, shoulder, groove, thread or end shape by drawing |
| Processing | Cutting, facing, turning, thread review or simple machining |
| Allowance | Required when final dimensions need machining |
| Packing Method | Wrapped or separated according to surface and part shape |
| Order Note | Material note and final geometry should be clear |
Material Fit
Grade-Controlled Orders
Zr705 rod is suitable when the drawing or purchasing document clearly calls for UNS R60705 or an equivalent zirconium alloy grade. Substitution should be confirmed before order.
Machined Blank Use
This material form is practical when the final part needs turning, shoulder machining, end facing or controlled diameter changes. Starting diameter should include enough allowance.
Fit-Sensitive Components
Zr705 rod may be checked for selected round components where final fit, step position or thread engagement is important. The drawing should show all functional dimensions.
◆ General Note: Zirconium alloy grade selection should be checked with actual service condition, fit requirement, load condition, medium, temperature and buyer specification.
Applications
Shouldered Rod Blanks
Used as starting stock for Zr705 round parts with shoulder positions or diameter transitions shown on drawings.
Machined Connector Rods
Used for zirconium alloy connector-style rod parts where end geometry and final fit should be reviewed.
Threaded Stud Stock
Used when a Zr705 rod will be machined into threaded stud-type parts with controlled thread length and end detail.
Precision Turned Pieces
Used for small-batch turned Zr705 components where starting diameter, tolerance and surface finish matter.
Alloy Round Blanks
Used as zirconium alloy round blanks when the project requires UNS R60705 instead of general zirconium rod.
Custom Zr705 Components
Used for drawing-based Zr705 round components with steps, grooves, threads, shoulders or special surface requirements.
Packing & Delivery
Geometry Protection
Stepped, threaded or faced parts should be protected according to final geometry and edge condition.
Surface Wrapping
Ground or polished Zr705 rods can be wrapped or separated when surface marks need to be reduced.
Blank and Part Packing
Rough-cut rod blanks and finished machined pieces may need different packing methods according to size, surface and geometry.
FAQ
Q1: What is Zr705 Zirconium Rod used for?
A: Zr705 Zirconium Rod is used for grade-controlled alloy rod blanks, shouldered parts, connector rods, threaded stud stock, precision turned pieces and custom Zr705 round components.
Q2: How is Zr705 rod different from Zr702 rod?
A: Zr705 is a zirconium alloy grade, while Zr702 is commercially pure zirconium. Zr705 is usually selected when the drawing or project document specifically requires UNS R60705 or a zirconium alloy rod.
Q3: What information is needed for quotation?
A: Please send the material note, starting diameter, final geometry, cut length, quantity, surface condition and machining details. A drawing is recommended for stepped or threaded parts.
Q4: Can Zr705 rod be machined into shouldered parts?
A: Yes, shouldered or stepped parts can be reviewed by drawing. Please show all diameters, lengths, shoulders, grooves and tolerance requirements clearly.
Q5: Can threaded areas be prepared?
A: Threaded areas can be reviewed according to drawing. Thread size, thread length, end face and tolerance should be provided before checking.
Q6: Can Zr705 be replaced by Zr702?
A: Only if the buyer or project specification allows substitution. Grade change should not be assumed when UNS R60705 is shown on the drawing.
Q7: What surface finish can be discussed?
A: As-processed, turned, ground or polished surfaces can be discussed. The suitable option depends on whether the rod is used as raw stock, machined blank or final component.
Q8: What affects delivery time?
A: Delivery time depends on grade matching, starting diameter, quantity, surface finish, cutting, turning, thread review and drawing-based machining requirements.
About Us
Baoji Zhongxinbao Metal Materials Co., Ltd. supplies titanium materials and selected rare metal products for industrial, chemical, electrochemical, vacuum furnace, machining and custom fabrication applications.
For Zr705 Zirconium Rod, we can help check practical supply options for UNS R60705 grade matching, starting diameter, machining allowance, shouldered geometry, thread area and drawing-based round components. For custom Zr705 alloy rod parts, we focus on material note, final geometry, surface handling and packing protection before supply.
Please send your required Zr705 Zirconium Rod material note, starting diameter, final part drawing, quantity and surface requirement through the inquiry form below.
Hot Tags: zr705 zirconium rod, China zr705 zirconium rod manufacturers, suppliers, factory
